Back to blog
LEGO

A LEGO® shelf in a child's bedroom: display their builds safely and rotate them

By The PrintWonders team

In a child's bedroom, a brick build rarely stays in one piece for more than a few days. The spaceship finished on Sunday goes on the chest of drawers, then on the windowsill, then on the floor, and one morning a wing is missing. Your child is proud of what they built, but there is nowhere safe to keep it.

A LEGO® compatible wall shelf solves part of the problem: the build leaves the floor and the furniture where everything else gets dumped. In a child's room, though, the location, the stability and the way you refresh what is on display matter as much as the dimensions. This guide focuses on those three points. For the general choice of height and wall type, our guide to displaying your collection on the wall goes into more detail.

Pick the spot with your child in mind, not the décor

In a living room, you hang a shelf where it shows the build off best. In a child's room, the first question is different: where will it be out of the way of everyday life?

Away from play areas and busy paths

Avoid the wall right above the bed, especially with a bunk bed or a loft bed, and the walls your child throws a ball at or leans on while getting dressed. A side wall above a desk or a low chest of drawers is usually calmer. The idea is simple: a build that never gets brushed against never falls.

A height that depends on who handles the builds

There are two ways to look at it. If you want your child to take down and put back their builds on their own, mount the shelf within reach, above a stable piece of furniture rather than high up. If the shelf is a display case for fragile models or an older sibling's builds, mount it out of the youngest child's reach. Either way, a wall shelf is neither a step nor a climbing hold: tell your child so clearly, and do not put it where they would be tempted to hang from it.

Think about younger siblings

Brick builds contain small parts. If a toddler shares the room or spends a lot of time in it, keep the shelves within reach of the older child only, or higher still. It is the same reflex you already have with the boxes of bricks themselves.

What keeps a build in place

Once the spot is chosen, the next step is making sure the build does not slide or tip over the first time a door slams.

Built-in safety lips

Our shelves have small built-in lips around the edge of the surface. Their job is to hold the build in place and prevent accidental falls, for example when a door bangs shut or a cushion flies a little too high. They do not replace a well-chosen spot, but they add a welcome safety margin in a room where people play.

A surface cut to the build

A build sitting on a shelf that is too large slides around; on one that is too small, it overhangs and tips. The usable surface, meaning the inner area the build rests on, can be set from 50 to 300 mm in length and from 50 to 200 mm in width. The walls and lips are added automatically around it. Measure the base of the build, then add 1 to 2 mm of margin so it can be lifted off without forcing.

The rear clearance, adjustable from 5 to 100 mm, is the empty space left between the wall and the shelf: it lets parts that stick out at the back clear the wall. For a vehicle with a spoiler or a build with an antenna, this is what stops the whole thing from being pushed forward.

A structure designed for the load

The outer shell of the shelf is made of PLA+, a reinforced version of PLA, the most common plant-based plastic in 3D printing. The internal reinforcements are made of PETG, a plastic that copes better with mechanical stress, and diagonal braces are calculated automatically for the dimensions. The shelf holds up to 2 to 3 kg depending on its size. That is plenty for a child's builds, but it is not a bookshelf: keep it for builds.

Fixings that suit the bedroom wall

The screws and wall plugs supplied are suitable for concrete, brick and plasterboard, and a screw cover hides the screw head. The other option is the batten mount (+€3.50): a batten is a simple strip of wood fixed to the wall, which the shelf hooks onto and can be moved along without drilling a new hole. In a bedroom that gets rearranged as the years go by, it is often the most flexible choice.

Rotate the builds: a shelf that grows with your child

A child who builds a lot produces more models than one wall can hold. Rather than adding shelf after shelf, set up a rotation.

A "build of the moment" shelf

Keep one shelf for the latest finished build, or the one your child is proudest of this month. When a new one arrives, the old one comes down: it is taken apart so the pieces can be reused, or stored in a box with its instructions. Your child decides what earns the spot, which also makes it easier for them to accept taking the rest apart.

Dimensions that leave room to change

If the builds change often, do not size the shelf to the millimetre for a single model. Choose a surface that matches the usual footprint of your child's builds, with the handling margin mentioned above. A shelf sized for a medium build will take most of the ones that follow.

Two or three shelves rather than one big one

For a child who builds a lot, two or three shelves of different sizes, spaced out on the wall, work better than a single very long one: every build has its own place, and a knock on one does not bring down the others. Each shelf is configured separately.

What to budget

The shelf starts at €21. As an example, a 50 × 50 mm shelf in black with screws and wall plugs comes to €30.25 including VAT. The price changes with the dimensions and options, and the configurator shows it live. Each shelf is made to order in our workshop in Vatimont, in Moselle, France: allow 5 to 7 working days for production, plus 2 to 3 days for delivery in mainland France. Delivery to the rest of Europe is also available. If you are thinking of giving one for Christmas, our article on a shelf as a gift for a LEGO fan explains the last order date.

Frequently asked questions

Can my child handle the shelf on their own?

They can take builds down and put them back if the shelf is at their height. They should not hang from it or lean on it, though. It is a display shelf fixed to the wall, not a toy.

What if I do not know the exact dimensions of the model?

Measure the base of the build (length and width) and the part that sticks out at the back. You can also give us the set number so we can check the dimensions.

Give their builds a place of their own

Measured the build and picked the wall? Configure the LEGO® compatible wall shelf and watch the price update with every setting.

And if the board game boxes in the bedroom are overflowing too, our board game storage inserts are designed to the dimensions of each box.

A LEGO® shelf in a child's bedroom: display their builds safely and rotate them | PrintWonders