Back to blog
repair

Garden furniture, parasol, pool: repair the broken plastic parts over winter

By The PrintWonders team

End of the season, the patio set goes back into the shed. That is exactly when you notice them: the chair that wobbles since a foot cap vanished into the lawn, the sun lounger whose backrest only stays flat, the cracked parasol crank you nursed all summer. In July, you make do. In November, you have time.

Winter is actually the best season to deal with these small breakages. The furniture is not in use, nothing is urgent, and every part remade now saves you from discovering the problem at the first lunch outside. Here is how to have your garden's plastic parts remade by 3D printing, and which ones are better left to a professional.

Why these parts are so hard to replace

Garden furniture is sold in seasonal collections. A range of chairs or loungers stays on the shelves for two or three summers, then disappears along with its accessories. The day a clip gives up, the reference no longer exists, and at best the seller offers you a whole new chair.

The same goes for parasols, whose mechanism parts are rarely sold on their own, and for above-ground pool accessories, often tied to one specific model. The outcome is always the same: an object in good condition, out of action because of a few grams of plastic.

The garden parts we remake most often

Patio sets and chairs

Foot caps come first by a long way. These are the small end caps that protect the tips of metal legs and keep them from scratching the terrace. They get lost, split, or wear down on one side until the chair rocks. Next come table glides, screw covers, the clips that hold a cushion or seat in place, and armrest rings.

Simple parts with no significant load, often remade as a full set so that every chair still matches.

Sun loungers and deckchairs

The critical part is almost always the backrest adjuster, the small plastic notched rack that the bar slots into to set the angle. One broken tooth and the backrest slides down. Then come rear wheels, fabric clips and bar end caps.

Parasols

Opening crank, clamping collar (the ring that locks the parasol at the right height on its pole), rib tips, tilt knob. These parts work hard: they are turned, tightened and pushed every time you use them. They reproduce very well, as long as the right material is chosen.

Pool and surroundings

Cover fastening clips, telescopic pole end caps, skimmer lid (the surface basket that draws in the leaves), solar shower brackets, hooks for storing accessories. Anything used to fasten, hang or protect is straightforward.

The right material for what the part goes through

This is what matters most for a garden part, and it is why we always ask where and how it is used.

  • PETG is our default choice as soon as a part does mechanical work: crank, backrest adjuster, clip, clamping collar. It is a filament known for its mechanical strength.
  • TPU is a flexible filament that bends and springs back into shape. It suits parts that need to cushion or grip without slipping, like a foot cap or a glide.
  • PLA stays reserved for decorative or barely stressed parts, preferably under cover.

Tell us whether the part stays outside all year, whether it sits in full sun, whether it is in contact with pool water. Every situation is different, and we would rather settle the question case by case at quote stage than promise you a one-size-fits-all lifespan. Flexible and technical materials are covered in our TPU and Nylon guide.

Prepare your request in five minutes

Make the most of winter storage: the furniture is at hand, clean and dry.

  1. Collect every piece, even the chips. The smallest one is often where the snap-fit lug used to be.
  2. Take three photos on a plain background: top, bottom, side. Add one of the spot where the part fits, with the part removed.
  3. Measure the key dimensions with a ruler or a caliper, the jawed measuring tool: tube diameter for a foot cap, hole spacing (the centre to centre distance) for a screwed part, thickness at the thinnest points.
  4. Count the copies: four chairs means sixteen foot caps. There is no minimum order, and identical copies come with a discount.

If the part has vanished completely, an intact twin on another chair makes a perfect model. Our article on discontinued appliance parts walks through the same method step by step.

Quote, production and turnaround

The quote is free and you get an answer within 24 hours. If you already have a 3D file, send it as STL, OBJ or 3MF. Otherwise the part is modelled from your photos and measurements, and that step appears as a separate line on the quote. For price ranges, our article on what a repair costs breaks down each item.

Once the quote is accepted and paid, the part goes into production within 12 hours, Monday to Friday from 9am to 7pm, then allow 3 to 5 working days of production depending on complexity and workshop load. Tracked delivery in mainland France from €6.90, or free pickup at the workshop in Vatimont, Moselle. Ordering over winter gives you breathing room: no need to sort everything out the night before the first barbecue.

The parts we do not remake

Some parts belong with the manufacturer or a professional, and we will tell you so at quote stage:

  • anything with a safety function: pool ladder fixing, gate or alarm latch, load-bearing part of a swing or hammock;
  • pressurised water circuit parts (pump or filtration fittings);
  • structural parts under heavy load, such as the base of a cantilever parasol.

For everything else, foot caps, clips, adjusters, cranks, glides and hooks, a remade part puts the furniture back in service for the price of a small piece. Our list of ten hard to find spare parts shows how wide the range of fixable parts is.

Frequently asked questions

I no longer have the original part, is it still possible?

Yes, if an identical part still exists elsewhere on the furniture or if its housing can be measured. We rebuild it from those measurements.

Can you match the original colour?

We offer the closest colour among our available materials. If the shade matters, say so in your request and add a daylight photo.

Send your photos while the furniture is stored away

Three photos, one measurement, a few words on how the part is used: describe it on the workshop form and get a priced answer within 24 hours. The plastic part repair page details the full process. And if you already have the part's file, on-demand 3D printing is the most direct route.

Garden furniture, parasol, pool: repair the broken plastic parts over winter | PrintWonders